how to use jdflasher and Far Manager.
TUTORIAL BY OUR VIP MEMBER You are not allowed to view links.
Register or LoginDIEZIL
Firstly we will need to download and install the required software.
Installing USB Flash Driver's:
You are not allowed to view links.
Register or
Loginhttp://modmy-forum.com/index.php?topic=2603.0
Far Manager & Jdflasher 2 in one .
You are not allowed to view links.
Register or
Loginhttp://modmy-forum.com/index.php?topic=2165.0
You are not allowed to view links.
Register or
Loginhttp://forums.se-nse.net/index.php?showtop...t=0&start=0
You are not allowed to view links.
Register or
Loginjdflasher_53wrecovery
file's needed to work with Cid53
Patching/Flashing with jdflasher
Setting up jdflasherInstall Far Manger to your Computer, once you have Far Manager installed we need to setup the jdflasher plugin, to do this we simply place the jdflasher folder into the plugin folder of the Far Manager install directory ie: "D:\Program Files\Far\Plugins\jdflasher" or wherever you have installed Far Manager on your system..... Simple.
Example:
Getting to know Far Manager
The basic layout of Far Manager (Dos) can be a little confusing, take a quick look at the picture below:
You may notice that I've highlighted both windows of Far Manager, each of these are "separate" file managers, by default there both set to "D:\Program Files\Far\" as that is where I have my Far Manager installed on my system, but the browser's by default will always be set to where you have installed Far Manager on your system.
The basic commands like copy/delete are:
F5 = Copy
F8 = Delete
F7 = Create Dir
Hold Shift + Arrows = Highlight Files
Tab = Switch Windows
Alt + F1 = Change Drive (Left Window)
Alt + F2 = Change Drive (Right Window)
(those are the only real commands we need to learn, but they will be listed at the bottom of Far Manager, they will just have number's for each of the commands, like "1 Help" but it actually means F1 Help ).
Using jdflasherOK since this is a tutorial I'll do a universal modification that is compatible with all phones so you can get to know just how to use jdflasher, installing the Halmer Certificate (this is used to sign Java applications to run without getting all those security prompts (Permissions).
Halmer Certificate:
You are not allowed to view links.
Register or
Loginhttp://www.4shared.com/file/27398791/3bc21...e_-_Halmer.html
Some phones require breakin loader's to gain access to the phones Internal FS, so for that sake of that I'll be using a CID49 RED W810 as this is one of those phones. (you should remove your phones Sim Card and Memory Card while connecting your phone to any tool)
Now lets get connected and modding with jdflasher, we'll be using the left file manager of Far Manager to connect to our phone, so press Alt+F1 and we will see a screen like this:
The top box is your Drives/Partitions/USB Devices, and the lower box is the Far Manager Plugins, were using jdflasher so we need to select "just da flasher", (you can use your mouse to click on it, press 0 or use the arrow keys and enter to select it).
Now we should be in jdflasher and the screen will look like this:
Now we need to set jdflasher up to be used with our phone, in this case W810, so select the "scripts" and browse down to W810 or whichever phone you will be using (if you own a DB2012 or DB2020 select that instead looking through the list for your model, if you own a DB2020 and have installed the Quick Access Patch, select qa2020), in the "port" we leave it set to "DCU-60", and in the "Speed" we select the fastest (921600).
And once you have set that press "jump down into the large rabbit-hole"
And you will end up with a screen like below, follows the instructions given by jdflasher to connect your phone, insert battery hold "C" and connect your USB lead (as you did when installing the USB Flash Driver).
And you will now see a screen that looks like this:
Since we are using a CID49 W810 we are presented with 4 options "bflash/bfs/oflash/ofs" (different models have different options, but they'll always be from this selection) lets break it down to Flash and FS, ofs means we can only write files into the phones FS while bfs means we can read as well as write files and from the FS.
(if you have an option to enter using bfs or ofs, choose bfs as that means we can extract files from our phones Internal FS, if we try to extract files using ofs we will receive an error as "read" is not supported by ofs).
So now we double click "bfs" to enter our phones Internal File System.
Note: since we are using a CID49 W810 which requires breakin loader's, entering the FS is a little different, so you can skip this section if you???re using something like a CID52 K800 (DB2020) as they don't require breakin loaders, they just go straight into the Internal FS).
Once we press "bfs" Far Manager will start to enter the Internal FS but if your phone needs to use breakin loader's you will have to do this step before you actually enter the FS.
jdflasher will ask you to disconnect the phone, remove the battery, then reinsert it and press OK.
Once we have done that and pressed "OK" will need to reconnect as you did went jumping into the rabbit hole (I love that.... rabbit hole), and we will eventually end up with a screen like this (yay... we have just entered the phones Internal FS).
DB2020 owner's and all other's who don???t require breakin loader's will also be here so you can tune back in now
Since we are installing the Halmer Certificate we need to browse to "tpa/preset/custom".
(as I said this is compatible with all phones and the general folder layout of the Internal FS is the same ie: the custom folder will be here, the menu folder will be "tpa/preset/system/menu" and so on with the exception of a few directories like Fonts which will be in the same place on all DB2020 phones).
The simplest way to browse is to just click on the directories with your mouse, but you can alternately use the arrows on your keyboard and use enter as the mouse button, so browse to "tpa/preset/custom" and it will look something like this:
Now for the sake of it I've got the files we need to upload on my other hard drive partition (C:\) to give you an idea of how-to browse your disks using Far Manager (normally I would just move the files to the Far install directory for sake of quickness, as you probably noticed from the screen shots ie: K850 menu icons folder, and also a few font folder's for my K800).
We now need to browse to the files we will be uploading to our phones FS and Ooops I need to switch drives, to do this I press Alt+F2 (do not browse using the left window as it will leave your phones FS (and in my case without flashing the rest file and my phone wouldn't switch on as I've entered using breakin loader's)), once you press Alt+F2 you will now have a screen that looks like this:
Since I have the files needed for the Halmer mod on my C:\ drive I need to select C: and browse to "C:\Users\diezil\Desktop\customize_upgrade_halmer", or you browse to where ever you have the files stored (now do you get how to browse with Far ), and I'll now have a screen like this:
Now to copy the files to our Internal FS (the left window), we can use our mouse and press and hold then drag it into the left window one at a time, or we can highlight both and copy them together (usefull for copy a lot of files like an acoustic pack), you should be set to be contoling the right window but if you???re not then simply press the "Tab" key to switch between the two, now press and hold the "Shift" key on your keyboard and use the arrows to move down and highlight the files, when the file names turn "yellow" that means there highlighted, now to copy we press "F5" and we'll see this:
And press copy to copy the files.....
and hopefully we will now look like this:
Now that we have the files in place we MUST shut down the csloader in the correct way (especially if you???re using a phone that requires breakin loader), to do this we press ".." at the top of the left window to move back one directory..... keep doing this until you receive this message.
We press "yes" to shut down the csloader..... (after pressing yes, if you???re a DB2020 owner of your phone don't require rest files and breakin loader's you are now finished ).
If your phone requires breakin loader's there is one last step to be completed..... Restoring the Main Firmware File (flashing the rest file), and since den_po is a genius jdflasher will do this for you (well it asks you).
Select yes if you wish to restore the main (id imagine in most cases you will
, but if for some reason you select no, you can either flash a rest file using XS++/Far/SETool2 Lite, or reconnect and leave the Internal FS in the correct way and select YES instead of no).
After pressing YES you will once more be asked to unplug, remove the battery and reinsert it again and press OK.
Reconnect in the usual way so that the rest file can be flashed:
When Far Manager looks something like this, it will be safe to turn on the phone and enjoy whatever modification you just made, in this case the Halmer Certificate (of course you will first need to download the EQHalmer program to achieve any benefits from this, but now you know how to upload and work with your Internal FS using Far Manager and jdflasher)
EQHalmer: (used to sign jar files)
You are not allowed to view links.
Register or
Loginhttp://www.4shared.com/file/27398268/c34d786c/EQHalmer.html
Patching and installing the Quick Access Patch can be another day (or look in the tut's section).....
Ill edit the post and add the patching side of things some other time as my poor little fingers are f#@%ing stinging
